Scotts® Outdoor Cleaner Plus OxiCleanTM Concentrate
Overview & Benefits
Scotts® Outdoor Cleaner Plus OxiClean™ Concentrate is great for large outdoor cleaning projects. It uses Fast-Foaming Action that starts working on contact to lift dirt and wipe out stains from Moss, Mold, Mildew and Algae and more. Also, Scotts® Outdoor Cleaner Plus OxiClean™ is safe to use around lawns and plants, plus it will not damage fabrics. Even better Scotts® Outdoor Cleaner Plus OxiClean™ can be used in Power Washers, unlike other outdoor cleaners. The outdoor cleaner is incredibly versatile and can be used on a variety of surfaces such as: concrete, wood, siding, patio furniture, outdoor fabrics, flower pots and more! Finally, the 1 Gallon Concentrate bottle is a great value making up to 10 Gallons of cleaner!
- Product Specs
- Fast-Foaming Action that Starts Working on Contact
- Lifts Dirt and Wipes Out Stains from Moss, Mold, Mildew and Algae and More
- Safe to Use Around Lawns and Plants
- Will Not Harm Fabrics
- Cleans Concrete, Wood, Siding, Patio Furniture and More
- Safe to use with Power Washers
- Makes up to 10 Gallons
- OxiCleanTM is a trademark of Church & Dwight Co., Inc. and is used under license by The Scotts Company LLC. Learn More about Scotts Outdoor Cleaners
How to use
For general cleaning and brightening, add 12 oz (1.5 cups cleaner to 108 oz (13.5 cups) of water. For heavily soiled areas, add 32 oz (4 cups) cleaner to 96 oz (12 cups) of water. Apply solution to the surface to be cleaned.
Let solution set for a few minutes. For best results, scrub as needed. Lightly rinse with water. If product dries, reactivate cleaner by scrubbing with a wet brush, or lightly spray with water. Expect foaming action to continue after rinsing. Residual foaming will naturally dissolve.
Power Washer Directions with Chemical Chamber
Refer to your power washer manual specific for chemical use instructions. Fill chemical chamber with undiluted concentrate. With LOW PRESSURE SOAP NOZZLE, apply cleaner until wet.
Let solution set for a few minutes. Use high pressure nozzle to rinse surface. Foaming may continue after rinsing. Residual foaming will naturally dissolve. After cleaning, do not store cleaner in chemical chamber. Fill chemical chamber with water and flush using low pressure soap washer to prevent damage.
Power Washer Directions No Chemical Chamber
Dilute concentrate according to directions for use. Apply cleaner solution directly to surface.
Let solution set for a few minutes. Rinse area with high pressure nozzle. Foaming may continue after rinsing. Residual foaming will naturally dissolve.
Tank Sprayer Directions
Poor diluted cleaner/dilute concentrate product in clean tank sprayer. Apply cleaner solution directly to surface to be cleaned.
Let solution set for a few minutes. For best results, scrub as needed. Lightly rinse with water. If product dries, reactivate cleaner by scrubbing with a wet brush, or lightly spray with water. Expect foaming action to continue cleaning after rinsing. DO NOT STORE product in the tank sprayer and be sure to rinse sprayer out thoroughly after use.
Where to use
Can be used on multiple surfaces such as: concrete/brick, wood, composite wood, vinyl, patio furniture (including outdoor fabrics), roofing shingles, fiberglass, painted metals, etc.
When to apply
Apply to surfaces that need cleaning as needed
Covers 1,000 to 2,500 sq ft depending on dilution
This is not the product label. Always read and follow the product label before use.
1 gallon bottle