How to Use

Place plastic cap provided on top of spike.

Drive spike into ground around tree or shrub following the dripline.

Spikes should not be placed closer than 2 feet from the trunk or center of tree or shrub. If the dripline is closer than 2 feet, insert spikes 2 feet away from center of shrub or tree trunk.

Remove plastic cap, saving for future use. Continue to drive spike into ground 2 inches below the soil surface.

Use the diameter of the dripline of the tree or shrub as a guide to determine the number of spikes needed per plant (see label).

Store unused spikes in a dry place ideally in a sealed plastic bag.

When to Apply

Once per season (once in early spring, once in mid fall). Apply when the ground is soft and moist. If the ground is dry, wet before driving spikes. Use on evergreen trees to fulfill special needs of these trees.

How often to apply

Apply once in early spring and once in mid-fall

Where to Use

Use on all species and varieties of trees and shrubs

Coverage Area

Use diameter of drip line of tree or shrub to determine number of spikes to use.

Benefits

Bigger, more beautiful blooms and lush darker-green foliage from your rose bushes.

Fertilizer Analysis

15-10-9

Container Type

Box

Shelf Life

Indefinite shelf life as long as they are kept dry

This is not the product label. Always read and follow the product label before use.

Material Safety Data Sheets can be requested by contacting our Scotts Help Center. Either call toll-free at 1-888-270-3714 or send us an email.

* This is not the product label. Always read and follow the product label before use.