Step 1: Use a pre-measured feeder refill packet to fill the Miracle-Gro Garden Feeder (approximately 1 and 1/4 pound of plant food). Step 2: Turn on the water; in 12 minutes it will have covered 500 square feet of garden with 50 gallons of solution. Thirsty bushes or tomato plants take about 15 seconds to water; smaller plants take even less time. When finished, clean by turning the feeder upside down and loosening the jar approximately one turn while water continues to flow through the jar. Continue to spray in this position until the jar is empty. REMINDER: if you choose to stop feeding before all of the plant food in the Garden Feeder has depleted, the solution can be stored in liquid format and be used during the next feeding.
All Miracle-Gro applicators and watering Cans can be used to apply Miracle-Gro on ornamentals of any kind. Do not use hose-end applicators on indoor plants unless those plants are taken outdoors for the application.
Do not use hose-end applicators on indoor plants unless those plants are taken outdoors for the application.
When starting with a jarful (1 1/4 pounds of Miracle-Gro) you will have 50 gallons of food. 1 jarful will cover 500 square feet of garden area or 1000 square feet of lawn. Recommended water pressure is 40 - 80 PSI. The feeder dispenses at 4 gallons per minute (1 gallon every 15 seconds).
A new easy-to-grip handle, trigger with lock for one-handed control, and three spray patterns: shower, jet and stream,
24-8-16 with micronutrients
50-gallon capacity feeder
* This is not the product label. Always read and follow the product label before use.
Need an answer to a product question? Scotts experts are always available by email and phone in our Help Center.
