Place plastic cap provided on top of spike.
Drive spike into ground around tree or shrub following the dripline.
Spikes should not be placed closer than 2 feet from the trunk or center of tree or shrub. If the dripline is closer than 2 feet, insert spikes 2 feet away from center of shrub or tree trunk.
Remove plastic cap, saving for future use. Continue to drive spike into ground 2 inches below the soil surface.
Use the diameter of the dripline of the tree or shrub as a guide to determine the number of spikes needed per plant (see label).
Store unused spikes in a dry place ideally in a sealed plastic bag.
Once per season (once in early spring, once in mid fall). Apply when the ground is soft and moist. If the ground is dry, wet before driving spikes. Use on evergreen trees to fulfill special needs of these trees.
Apply once in early spring and once in mid-fall.
Use on all varieties of evergreens like pines, spruces, yew, dogwoods, hemlocks, junipers, arborvitae, etc.
Use diameter of drip line of tree or shrub to determine number of spikes to use.
All evergreen trees and shrubs
Beautiful foliage and vibrant color for evergreen trees and shrubs.
When used according to label instructions, our products pose no health risks to humans, animals, wildlife, or the environment and there is no reentry delay.
12-6-12 plus minor elements: MicroMax® Nutrients (Iron & Maganese)
Indefinite shelf life as long as they are kept dry.
* This is not the product label. Always read and follow the product label before use.